Rolling oils are need used for flat processing of Copper/Brass, to provide desired shape such as strip for flattening the rolled alloy. The rolling procedure involves continuous forward and backward extrusion of metal, which generates friction between the rolling surface and the strip.
The purpose of rolling lubricant such as Rolube 6001 is to lower the coefficient of friction, cooling and protection against corrosion.
6001 is engineered specifically for cold rolling Copper and Brass.
It easily forms an emulsion with water. It is designed to allow separation of tramp oil and metal fines with minimum staining of Copper and Brass surfaces.
During the annealing process 6001 has excellent burn off characteristics.
6001 is resistant to bacterial degradation and contains no phenols, PCBs, nitrites or heavy metal compounds.
6001 also functions as a drawing and stamping compound for Brass, Copper and Aluminum.
OPERATING GUIDELINES :
Rolube 6001 is recommended for hot rolling aluminum and for hoot and cold rolling of copper brass, and other non-ferrous metal. It is used in 2-Hi and4-Hi breakdown mills, tandem mills, finishing operations, and tube mills. Depending on the amount of reduction and surface speeds, Rolube 6001 is used at between 0.5 to 8.0% in rolling operations; typical concentrations are: temper mill 0.5 to 3.0%, breakdown 3.0 to 5.0%, intermediate 5.0 to 8.05. For machining operations Rolube 6001 is used a concentration of 5.0%. For stamping and drawing Rolube is used at 5.0 to 50%.Hot rolling operation: 7 to 10%
Temperature: 70° F (21° C) – 130° F (54° C) maximum
Concentration: (% by volume with water)
Temper Roll: 0.5 – 3.0
Intermediate: 3.0 – 5.0
Breakdown: 5.0 – 8.0
FICTION CONTROL :
- Oxidation resistance
- Burns off clean in anneal
- Bright and smooth finish compared to mineral oil based lubricants
- Large reductions at high rolling speeds
- Easy emulsion preparation
- Consistent excellent surface finishes.
- For Hot & Cold Rollin
Rolube 6001 is an emulsifiable rolling lubricant concentrate which, when added to water forms an oil in water emulsion. It is the world standard rolling lubricant for nonferrous materials. Rolube 6001 is used as a lubricant for the hot rolling of aluminum and the hot and cold rolling of copper, brass, and other non-ferrous metals. Rolube 6001 is compounded from high quality base oils, lubricity and other additives to provide excellent lubricity and emulsion stability, to yield a product that meets the demands of the metal rolling industry. It provides superior, consistent surface finishes, effective cooling, and exceptional lubricity that allow large reductions and higher rolling speeds. Rolube 6001 emulsions prevent metal pick-up on rolls and has good bite properties. Rolube 6001 emulsions leave no residue after annealing. Rolube 6001does not absorb tramp oil and allows rapid settling of metallic fines. Rolube 6001 is also used for machining and stamping non-ferrous metals
PREPARATION & MAINTENANCE :
The use of pure, mineral-free(never softened) water to mix this product will improve sump life, reduce concentrate usage and carry off. Chemical emulsions like Rolube work best if they are mixed with room temperature water and by adding coolant concentrate to the water, NEVER THE REVERSE. Using premixed coolant concentrate as makeup will substantially improve performance and reduce usage. The specific makeup concentration should balance the water evaporation rate with the carryout rate. Adding makeup Rolube at 30-40% of the desired working concentration will generally maintain the proper concentration in the sump.)
Add Rolube to water with agitation. For best results water should have a pH of 6.9 to 7.5 and a total hardness of 100 to 275 ppm as calcium carbonate. The pH of the emulsion should be maintained between 8.5 and 9.5. Concentration of the emulsion is determined using a hand-held refractometer: the refract meter reading is the concentration. The best operating temperature is between 70° F (21° C) and 130° F (54° C). Although emulsions of Rolube 6001 are relatively unaffected by hard water for maximum use life, dematerialized water should be used for daily top-offs.
The water properties needed to form an emulsion with Rolube 6001 is pH of 6.9 – 7.6. Total hardness of water should be 100-275 ppm as CaCo3.
QUALITY CONTROL :
Mixes easily with minimal stirring. The pH of working bath will normally buffer off to 8.5 – 9.0 and will remain there. Concentration of the rolling emulsion should be maintained using a refractometer.
It will give you direct concentration reading.
Rolube 6001 concentrate should be stored in a clean, dry area away from extreme heat and open flames. Avoid freezing. If frozen, thaw in a warn area and mix before using. Keep drums closed when not in use.
Do not freeze. Mix prior to using if separation occurs. Keep drums closed when not in use.
Note: The information presented herein is our interpretation of certain test results and field experience to date. The information is not to be taken as warranty or representation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation and verification